Heart Beat Rate Monitor Status

You can measure your heart beat rate in two ways: using your finger or at your wrist. - Launch HeartBeatRateMonitor and get to the Home screen. - Make sure the device’s flash is on.  Hold your finger on the camera for several seconds till HeartBeatRateMonitor captures your heart beat rate and displays it.  The Heart Beat Rate Monitor app has not been tested with individuals with health conditions, is not a clinical pulse oximeter and has not been cleared or approved by the U. S.  Heart Beat Rate Monitor is not intended to diagnose, prevent or treat any condition, or to be a substitute for professional medical care.  Hold on for several seconds till HeartBeatRateMonitor captures your heart beat rate and displays it.  HeartBeatRateMonitor detects your heart rate in few seconds using device camera.  If knowing your heart rate is critical to your health, you need to have your pulse taken by a medical professional.  Will get used after the first 2-3 measurements. - To check pulse at your wrist, place device's camera and flash on the spot between the bone and the tendon over your radial artery — which is located on the thumb side of your wrist.  Heart Beat Rate Monitor is a handy app for measuring heart rate.  The resulting number becomes the desired answer - the heart beat rate.  If you illuminate your finger with the built-in flash, the phone’s camera can capture the differences and calculate the frequency of skin tone changes per minute.  Control you heart rate in different situations, save to history.  If the flash did not turn on automatically, go to any other app screen and back to the home screen. - Put your finger on the phone’s camera so it simultaneously covers the built-in flash.  The essence of the method is simple: during heart beats, blood flow saturates and darkens the skin.  Measurements and statistics are intended for informational and educational purposes only, to support general health and wellness.  Here you will need a bit of practice to place your finger correctly.