π·οΈ About: RF Control remotely controls up to 24 channels of Sennheiser* and Shure* wireless receivers in one application, side-by-side. The intuitive user interface provides a quick overview of the most vital parameters of your wireless receivers.
by Kidaguirre
RFControl won't even load and then when it does it lasts for a couple mins but you can't access anything or add anything.
by GreNade D
It does not work.
by Music2727
I was the first one to throw money away don't be the second one!
by Mikesv
Seems a little buggy sometimes. I'm getting a message that I cannot connect but RFControl works for a while then stops working.
It's ok when it's working.
Yes. RF Control is quiet safe to use but use with caution. This is based on our NLP (Natural language processing) analysis of over 6 User Reviews sourced from the Appstore and the appstore cumulative rating of 1.7/5 . Justuseapp Safety Score for RF Control Is 28.1/100.
Yes. RF Control is legit, but not 100% legit to us. This conclusion was arrived at by running over 6 RF Control User Reviews through our NLP machine learning process to determine if users believe the app is legitimate or not. Based on this, Justuseapp Legitimacy Score for RF Control Is 52.6/100..
RF Control works most of the time. If it is not working for you, we recommend you excersise some patience and retry later or Contact Support.
For Sennheiser 2000 series and evolution wireless G3 devices Firmware 1.7.0 or higher needs to be present on the receivers to support the remote control protocol.
Sennheiser, EM 6000, EM 3732, 2000 series, evolution G3 / G4 are brands, products or trademarks of Sennheiser electronic GmbH & Co.KG and not associated in any way with RF Control.
RF Control remotely controls up to 24 channels of Sennheiser* and Shure* wireless receivers in one application, side-by-side.
Dedicated screens have been carefully developed to give you control to parameters that are relevant in a live situation while securing access to the ones that might be harmful to the safety of the system.
The scan window allows you to use one of the recognized Sennheiser devices to scan the RF environment.
During start up RF Control will scan your network for connected devices.
The full screen plot window of the iPad version allows to scroll through the recorded RF and audio levels to look up for problems and drop-outs even after hours of recording.
With the additional ScanPacks the scan data can be stored as *.csv file and uploaded to your personal Dropbox or sent as attachment via email.
The device list allows access to all devices in the network and selection of 24 devices for monitoring.
Sennheiser: EM 3732*, 2000* series and evolution G3 and G4* wireless receivers.
The intuitive user interface provides a quick overview of the most vital parameters of your wireless receivers.
A plot of the RF and AF levels is displayed over time, making it the perfect companion for walk tests and spotting dropouts in your audio.
Scan is not supported by Shure devices.
Either ScanPack will unlock the RF Inspector for sample accurate readout of the scan data at your fingertips.
