AC Infinity Reviews

I’ve tried a few different setups but no matter what, setting programming on my unit will occasionally flip my A/C outlet on and off even though the mode is set. Sometimes it will leave the light on even if the port isn’t part of automation. I haven’t had as much trouble just not using ACInfinity , but even with high hopes I’m afraid it’s just too dangerous to run. You’re killing my tomatoes! Maybe I set something up wrong, but I’ve tried different port types, rereading the manual, using preset automations, deleting and recreating said automations, trying different control modes. I can’t figure out how to set up ACInfinity without knowing that what it says it does isn’t what it actually does and some non-obvious way of fixing it. I’m sure it’s something to do with the light outlet, but I’d rather just not use it. At the very least, I want ACInfinity to stop automating the tent as soon as a fault occurs. Seems like the cloud instructions aren’t compatible with my Controller 69 Pro and A/C outlet running a 300W HID LED and official devices all at the same time unless I disconnect the chip from the Internet.

Up until I uploaded the new updates to my controller 69pro and iPhone, everything was going great! A week into my first grow all plants were thriving! I was hesitant to upload to the new revision but got tired of checking “later” in the apps pop ups. So I updated ACInfinity to 1.7 and the controllers firmware to F4.2.16. Big mistake! iPhone kept loosing WiFi and Bluetooth connectivity. When I had time to go check in the grow tent my in-line fan was running a max, the light was on max and would cycle off and on when I tried to reconnect to the controller through ACInfinity . Nothing like shocking week old seedlings with excessive light, heat and air flow! I’ve been working on this for two hours. I deleted ACInfinity off my phone and factory reset the controller three times now! It will reconnect to either Bluetooth or WiFi but not both. Why release an update that isn’t properly tested! Then force your customer to either update the controller and app or deal with annoying pop ups with every screen change of ACInfinity … very disappointing to me, and possibly devastating to the new plants!

Everything works fine except the data transfer. When you open ACInfinity to the graph / data page, the controller downloads info into ACInfinity . For two years everything was fine. Then the new clip on fans came out with control over how much it swings. I had purchased the new fan when an older first gen fan died. When that grow was over I installed the new fan and upgraded ACInfinity . From this point forward I no longer receive all the recorded data from the controller. I have large blanks of zero data for several hours. I have no way of adjusting the tent for ambient changes during the day while I am at work because I have no data to look at. I have no clue what the environment is in the tent during the day when I am away. I may get an hour or two… but never the whole day.
I emailed ACI and the reply said they are aware of the problem and due to the issue being in ACInfinity its not an easy fix. One update has come out since this started and that did not fix the issue. I didn’t actually realize how much I used the data until it was gone. I installed one of my security cameras in the tent and can say the tent runs as programmed.
So my only issue is the data not being transferred.
Its been weeks now. Outside of this issue everything I would say about ACI is 5 stars. But they get 2 until this issue is fixed.
I get more and more disappointed every week I check for another update to fix this and its not there.

I have noticed there to be bad or incorrect info on ACInfinity FREQUENTLY which completely goes against the point of this. When I’m at work and like to check my app for data, I notice that if shows my lights are “off” during the day. Those 2 ports that house my t24 IONGRID showed off, so I freaked out. When I called my wife to check… she showed me on FaceTime that the lights were indeed on. That’s not good because what else is the purpose of ACInfinity ? Second time this happened was this morning. It shows only one of the 2 lights ports were on but when I physically inspected I noticed that they were both truly on but ACInfinity /controller is not displaying it correctly. What gives? The whole purpose of having the 69 pro was so that I could see accurate info on the go. This is twice in a matter of weeks that I have freaked out because of incorrect info on ACInfinity .

I really hope this gets figured out quickly. For the first 3 weeks it worked perfectly then these two recent issues of bad data… it’s happened within 1 week. No, I haven’t changed any settings or anything on the controller or app to make it glitch. No my power hasn’t went out. No, I haven’t gotten a new phone. Yes, I’ve checked for the latest update of apps and even have it turned automatically on. Yes I’ve “restarted” the controller several times and even turned on and off my breaker. I really hope this gets fixed asap.

AC Infinity has pretty quality stuff. The UIS system is nice and the AC infinity environment is nice. The only thing I have a quarrel with is the controls. I bought 2 of the 69 pro controllers and both had issues with my T3 humidifier. When I had the grow lights, clip fans, in-line fans, and humidifier hooked up to one controller; my grow light and exhaust fan would pause. Turning on and off every couple of seconds. As soon as I remove the usb plug for the humidifier, the system worked great. If AC infinity could figure that issue out, the system would work fantastically. I am looking forward to the 75 pro controller - hopefully there are not as many issues.

I haven’t found a better option. That’s about the best I can say for this. I experience many reliability issues controlling connected devices. And the UX is horrendous. As an example. Want to set a schedule for your light at something other than 100% light intensity? You’ll be setting the mode to on to set the max intensity while the light is on. Setting the mode to off to set the min intensity while the light is off. Then changing the mode to schedule to define a schedule. It works. But it’s clunky and could benefit from a refresh of the entire user experience.

I have the ACInfinity running six controllers, six humidifiers and an equal number of fans.

When ACInfinity works well, it’s great. However, I have frequently have problems with it talking to the different AC Infinity devices. I have had the luxury of having extra cords so I could test whether it was cord or the unit itself. sometimes the cord, sometimes the unit, sometimes the controller itself/app just won’t recognize what is attached to it.

There is a plate of information that can be glean from the devices, and I find them to be way more useful than not having them. I do have two different AC Infinity lights, but, again ACInfinity /controllers would not recognize them and I had to run them on a separate timer

The most recent firmware update, cautioned the system would be down for three minutes, and that my devices would be reset to factory defaults. It did not say that all of my automation settings would also be cleared. Now I have to reprogram multiple automations for each of my 4 devices, which is very time consuming and could have been avoided with a little forethought.
Clearly developers could have found a way to save our settings and reupload them after the update but this was overlooked.
The rest of the software is good. Could use more graphics and info about each device running but the automations make ACInfinity well worth the time download and understand.

Love your products. I truly wish two things about ACInfinity. 1. Control on the go not just in proximity. 2. Smart watch/Apple watch capabilities. Other than that I have zero complaints. It was confusing at first but I’m catching on quick. I’m starting to use the Log and cross referencing any changes with my security cams. Hey….maybe you could add support for cameras too… just an idea.

P.s. if you end up implementing my ideas just shoot me a message and we can discuss compensation. Just kidding. Thanks AC Infinity.

I noticed that a few of the negative reviews had to do with not being able to connect to the smart controller. To be clear... the
“Smart Controller” included in the T6 and T4 kits will NOT WORK with ACInfinity, as they do not support Bluetooth needed to connect to ACInfinity at this time! Right now ACInfinity only functions with the brand new “67” controller.

For what it does... ACInfinity serves the much needed function of at-home monitoring and controlling your fan and programming different functions, alerts and notifications, and having the ability to chart the data! This is HUGE!

There are some quirks to be worked out. If you are running a program and want to override the program for manual control via the “on” option... nothing happens. You need to first disable the program and THEN got to “on” for manual control. It was a bit frustrating before I realized that, but it makes sense.

So far no problems with connectivity. Will update in a few months.

AC infinity is the best they have thought it all out for ya!
I set Controller parameters plug in the equipment
I have the Pro 69 so I have 8 ports and they are all full , Lights and intake and exhaust fans, clip fans Humidifier and Heater all plugged in
My light are made by others but even they are controlled by my controller
When its time to upgrade i will look into AC infinity lights
If you are growing and want to simplify your life you need one of these controller’s with the wifi feature i can be anywhere and know whats going on in my grow room
Check out their full line of product its impressive i use AC infinity exclusively for everything right down to my 5 gal fabric pot which have built in tie downs for that low stress training
I was not paid for this endorsement and rarely even give reviews
But i love this company and its products high quality at reasonable prices !
Keep Up the Great Work AC Infinity team
Give them a try you wont be disappointed
Best wishes

This is an app where you can tell that the team that made it really gave it their all. Easy to use, and they seem to have thought of everything when it comes to customization — tons of levers and programs and bells and whistles you can set up / control to easily manage your grow from your phone. Hoping wifi is coming to a future model (currently uses bluetooth so you must be in range) but that’s my only wish so far! Especially for the early days of an app... impressive!

I have a complete tent set up, exhaust, circ. Fans, 69+ controller. I love this companies equipment!!! Quality and innovation at a very reasonable price!! They put the features we need in an easy to operate package. I highly recommend them to anyone looking for equipment. I wish they treated bassdrop keys better though!! He does alot for them and it only seems fair to at least treat him like the rest of the gang gets treated!! Not many opportunities to relay that, figured this would be good!! Thanks ACI!!! Growers love!!

Was a 5 star product until the last update. I have 2 controllers that took 25 minutes to set up an automation program for because of the constant freezing and unfreezing. Never had any issues until this last update that combined all the graphs. iPhone is just over 1 year old with current iOS, so hardware isn’t an issue.

Update: All lagging has since been resolved with updates. Back to a 5 star product!

I’ve had several t’s and s’s cloudline duct fans and I’ve left a lot of reviews that praise ACI and my reason is simple. When there is a competitive market and one brand leads in all categories it tells me they are here to stay. Sound, aesthetically pleasing, cost, features (I believe they were 1st and are currently the only fan that has a digital controller), customer service/warranty, and air movement. Since the s4 was released I haven’t shopped for a different brand.

I’ve been using the AC Infinity app, coupled with AC Infinity fans, for environment automation for years and the technology just keeps getting better. Now with WiFi (and still Bluetooth enabled), ACInfinity and advanced controllers help drive a perfect growing environment and you can dial up changes from anywhere. My hats off to the AC Team for fantastic products, superior customer service, and an app that lets you control it all from your phone. Happy growing!

The this app app is the best app ever !! Everything is so easy and self explanatory!
You can control you tent set up controller from your phone from anywhere in the world through ACInfinity .! I have a busy schedule so this is perfect you can get alerts if something is wrong through ACInfinity and change the temp and light intensity and control the fans all from ACInfinity . I give it 2 thumbs up! Can’t get no easier then that. Haven’t had a problem yet !!

The AC Infinity app is awesome. It allows me to have full control over my tent and all the associated accessories from anywhere. Setup is simple and connecting new accessories is easy. Setting my lights, fans, and vent fan is super simple using the presets and then I adjust from there to hit the temp and humidity ranges I’m looking for. ACInfinity also records tons of useful information about conditions in the tent at all times, allowing me to see a long-term picture of the environment and fine-tune to get the best yields possible. It’s a great way to control everything in your grow environment, with a polished interface and frequent updates, this is the only way to grow.

I’ve been using ACInfinity for a few years at this point and it has done nothing but serve me well. Anything I can think of that needs to be automated is right at my finger tips making the process as easy as just adding water and nutrients. I also had to make a call to support one day and was helped very quickly getting my problem solved within minutes. Can’t say enough good things about ac infinity.

I’m a new grower. I’m doing a soil grow in a 2’x5’,x7’ tent. This is my 3rd year and about my 5th harvest. I needed a new inline exhaust fan, my hydroponic store guy finally talked me into the AC Infinity 69 pro controller that came with the exhaust fan. It took me a little time to figure out how to set up the controller but I’m so glad I have it. I’m constantly looking at ACInfinity and seeing what the conditions are in my grow. I’m learning about VPD and will make that my main focus on my next grow. I’m also waiting for the Terraform 7 to be available.