EpocCam Webcam for Mac and PC Reviews

At the moment, it doesn’t work. I start EpocCamWebcam viewer on my computer and all I see is a blank white page. It doesn’t have controls on it like it shows in the video of how to setup. I’m sure once it works it is probably awesome, but at the moment, it’s worthless. I’m not computer illiterate btw. I’ve done quite a bit of writing my own computer programs, at one point using machine language. So it’s very likely not user error. I will work on it to see if I can correct the issue and get it working and post back if I do.

Update...

After uninstalling the drivers and reinstalling them, it magically started working. Sometimes that’s all it takes but so weird it didn’t install correctly the first time. Anyway is working perfectly now and even for lower quality video being sent over (limit being it’s the free version), it still looks great. Very impressed.

EpocCamWebcam is very promising even for a free app. it is usable it's not demo crap where The only downside is the occasional not to intrusive ad. There's a bit of a connect delay then once it's up and running it runs pretty well. The best part is you can run thit in to camtwist And have a whole lot more fun!! like a roving camera Live feeding a projector with video effects. It Has a few bugs and clerks here and there but it's my number one pick for sending video from my phone to my computer live. I haven't really used it for anything but I still feel like I want to buy it ( it would be nice if there was a sale, I find I'm impulsive purchasing in the under three dollar range). I don't know what else to say I've been looking for something like this for a long time.

I just downloaded it and am getting used to how it works. It’s outputting an SD signal (4:3 instead of 16:9), which is less than ideal, but it certainly will get the job done when I need an extra angle.

It only sends the video to my computer when EpocCamWebcam is active on my phone, which makes sense. It installed two virtual cameras on my computer (probably front and back, though I can’t test it yet bc the front camera is currently locked), and I don’t know whether you can use both at the same time or not. If not, then I’m anticipating some difficulty switching between them on the fly.

It says at the bottom that if I review EpocCamWebcam , I can access the front camera as well, so here’s hoping that works.

EpocCamWebcam was working great prior to an update a few days ago. I was using it for online school and it worked fine as a webcam. The update came out and overhauled the look of it, it looks nicer now which I appreciate. However, it now doesn't stop my phone from going into sleep mode after a few minutes. This makes EpocCamWebcam useless since I can only use it 4 minutes at a time or else I have to constantly be tapping the screen to make sure it doesn't turn off. I hope this is just a bug, since I really like using EpocCamWebcam. Not sure if it doesn't do this on the pro version. PLEASE fix this!

When I first got this it was very promising. Automatically detects devices and connects on the same WiFi? Awesome! You can use it anywhere within WiFi range and with pretty good quality for a free software. Of course it would’ve been nicer to have a free 720p or native phone camera resolution but I’ll take what I can get. Users should only pay for filters that they could apply, or more recording features like slow mo. The. UI is so simple that it is confusing, I would want helper messages to get my phone connected more smoothly. It took many tries and I’m sure next time I use it, it will take more repetitive tries because it isn’t predictable. All in all though a good free webcam.

My laptop is connected to three external displays through the docking station and I keep my laptop closed while I’m working. It was a hassle to open my laptop to be able to use the camera every time I have a meeting. A quick online search and Epocam was suggested to use my phone camera as a webcam. The process is super easy, in less than 5 minutes I had Epocam installed on both my Windows 10 and my iPhone. I have been using it for Microsoft Teams, Zoom, Google Meetings, Skype and GoToMeeting. I have been using it for 2 months and have zero complaints. Plus it’s free. 5 stars for me

I saw the recent low reviews but, still decided to give it a shot since it was mainly complaints about the program not working on Macs. EPIC FAIL! I installed EpocCamWebcam to my iPhone and downloaded the files to my Windows laptop, but I could not get the program to open/run on my laptop, even after un and reinstalling it twice. Unlike most programs, this one did not immediately open once download to my Laptop, with instructions on how to set it up and all the other HELPFUL information needed to NOT waste an hour trying to figure it out. All I continually see is a white page. I'm not even going to bother contacting customer service. But I would still advise anyone to try it out, just to see if it will work for you. (Also, you have to pay if you want to use your phone mic as the audio source).

Until I’m able to test the full version I give this at minimum a 4-star. It was very easy to setup and connected immediately after installing drivers on my Windows computer. I need to fully test w/in a meeting but it seems promising. I really didn’t want to buy another device (webcam) so being able to use my iPad as a camera seems like a real positive to me. Only complaints far and this might be a deal breaker for me is that I want so work only in landscape mode ...

So I just downloaded EpocCamWebcam as my Mac doesn’t have a camera. On the first use, it looked good. I closed EpocCamWebcam , re-opened it because I was trying to flip the camera on my iPad (haven’t discovered if or how to do that yet), but immediately full screen ads started showing up on the iPad which were annoying because you have to watch them to regain access. Then I receive a message saying “rate EpocCamWebcam to start using front facing camera”. I can’t confirm, but I’m expecting that if I want the ads to go away, I’ll have to make an in-app purchase. Overall it’s cool. Let’s see how it works with Zoom, but I’m annoyed with the immediate annoying full screen ads already.

Giving this a shot since filmora only gives 2 options for iPhone, this or another app, to use as a wireless webcam so we shall see. I’ll update the review once I get more use of it. But off the bat, I think it’s kinda low that they don’t give you use of both front and rear facing cameras in the free version. I think that should be standard but definitely is not here. I’m also assuming I can’t connect wirelessly until I upgrade because when I try to click the wireless icon it does nothing. I’ll try it out and update once I have used it more but it looks like I have no choice but to upgrade to use the features I actually need.

I am more than happy to review an app. But having to rate EpocCamWebcam to enable front camera is poor practice. I want to test front camera without being ‘strong-armed’ into a premature review.

Faith and confidence in your product should never entail this type of practice, it’s shortsighted. $7.99 seems like a great price and all the reviews are solid so why continue to require a review.

An app review is not a right, it is a consumer’s choice if they feel a review is warranted. So to be fair, I’ll disclose I have not fully tested EpocCamWebcam to see if it meets my needs. I wrote this review because it was the only way to enable a necessary feature for me to test and determine if I want to upgrade to the $7.99 version.

I downloaded the free version of EpocCam to my iPhone XS Max to see how it works in making my iPhone work as a webcam for my iMac and MacBook Pro. I would have been happy to pay for the full version had EpocCamWebcam actually worked.

After installing the drivers on both my Macs, and rebooting in case that was the problem, and with everything on the same WiFi — and even with my phone plugged in with a USB cable, EpocCam free just didn't work.

In Zoom, EpocCam doesn't even list as a webcam option.

In Chrome, the EpocCam is listed as an option, but the video freezes the moment you choose it.

My iPhone, iMac and my MacBook Pro are all running the latest OS, so that's not it.

On my Macs, the EpocCam driver notifies me faithfully when I plug my phone in to USB and start EpocCamWebcam in my phone. That shows me the Macs and phone are communicating via EpocCam, its just not working.

Maybe it's not supposed to work on the free version, but there's no way I'm going to pay if I don't even know it's going to work.

I just wasted all this time, and now I have to figure out how to uninstall their useless software from my two Macs.

So, I had tried the Wi-fi solution offered, and the wired solution offer, and I never got the connection. I kept seeing the connection visual, so that confused me as to whether this would work or not.

What finally worked was connected both devices to my extender, a TP-Link RE450. That worked. I just tried again using my TP-Link A7 V5 router, and it worked there too. I thought that the traffic was prohibiting things.

I want to encourage my other teachers to use this, but I don’t think they will find the set-up process helpful. First of all, I never did get an icon on my device (Apple Mac Pro 2017), I had to go into finder to see the the plug-in. I also had to go to my system activity page to see it was working. Your suggestions did not work, but opening up Microsoft Teams and UberConference did. Sadly, no integration with Discord.

I am now encouraged to buy the full version to see how well that works there. I want to recommend the free version to my students. I think they will appreciate it.

Setting up EpocCamWebcam was remarkably simple - you can even airdrop the installer from your iOS device to your Mac. I did have to restart zoom though to get it to recognize the feed (not mentioned in the setup details). All was going well until I tried to turn on the flashlight - and it was disabled at the OS level (ie, I opened up the control panel and couldn’t activate the flashlight). The developers went out of their way to do this and the only way to unlock it is to buy the paid version. I understand paying for features that developers build, but it’s absurd to pay to unlock a feature that is literally built into the device.

When it works, it’s great. When it doesn’t, it’s frustrating and you end up resorting to the crap laptop camera.
I’ve noticed the camera app always has a hard time connecting to my laptop when I need to use it 😑 even with USB connection. They’ll play ad after ad after ad and when it comes time to connect, the phone will remain searching for the pc WHILE LITERALLY CONNECTED via USB. The ads I get. The lack of successful connection, I don’t.
I’ve troubleshoot it many times...still hit or miss. Hopefully an update will get this sorted, as this will been helpful in distance learning.

Update 8/3/30:
How interesting that EpocCam no longer works after my first test. I had a meeting and my app and laptop couldn’t connect (they are on the same WiFi) and then I used a usb cable and my camera froze once it connected, and not able to use the front facing camera. And the ads are super long when you start up EpocCamWebcam .

Another update: it works when testing but not when I’m in a meeting/class. It freezes when it first connects.

8/2/20
My MacBook camera is not working (it’s a common problem with my type and the Apple store is closed in my town due to Covid) so I needed a webcam for my Zoom meetings. I tested EpocCamWebcam out since it’s been promoted by many bloggers who have tested it and it seems to be working great through WiFi! Of course there is a 1-2 second lag but that’s to be expected. I’m going to see if it works on my work desktop computer via usb.
I wanted that front camera working so here is my review! (Leave a review to have the front camera working)

I've tested this with multiple devices but I get the same results: The connection sometimes doesn't occur and you have force close and relaunch EpocCamWebcam on both devices again and again until it connects. When you connect, on my Windows device, connection notification keeps popping up, and whenever notification pops up, camera feed freezes briefly, meaning that it keeps loosing the connection and makes the feed very very laggy. All these connection problems make EpocCamWebcam unreliable.

You cannot change the resolution or quality of the video and you cannot record within EpocCamWebcam . There's no annoying floating watermarks by the way, just one in the corner.

Not confusing if you can read on a 2nd grade level. My daughter is 7 and did this without my help. Like I said. I searched forever downloaded a ton of apps that don’t work. This works. I got an old crappy iPhone and newer MacBook and as long as you are on the same WiFi for both devices you will instantly be linked up. It is a def boss type movement. So if you like boss stuff then get this, if you like Donald Trump type stuff then keep scrolling.

Before I got my webcam, I tried this product about a week ago. After realizing it was garbage, I stopped using it. A day or so later, Discord stopped working and I had to get the test build to run it at all. My pc kept crashing when I played games. Yesterday My pc had a blue screen of death with the drivers name in the error message. Today I restarted to reset an adapter that disconnected. The pc would not start up again with more blue screens of death instead of a startup screen, repairs failed, and I am now in the process of factory resetting the machine. I had complicated OBS overlays and 20 HOURS in Satisfactory, a game that takes a lot of patience and hard work to progress. If steam and epic didn’t save your purchases on the cloud, I’d be suing this company. DO NOT USE.

I’m a university instructor teaching hybrid in-person/online courses this semester, which requires me to stream my in-person lectures via Zoom. I want to be able to control Zoom from my computer but if I use the computer’s built-in camera, students can’t see the whole board/ classroom. Now I can put my phone on a tripod in the middle of the room, use the phone’s camera as my computer’s Zoom camera, and everything works perfectly!

This initial review is based off of the beginning setup. Using a Windows or MAC, simply click the links in EpocCamWebcam ’s description. Afterwards, download EpocCamWebcam . Follow the instruction, open OBS Studio. Choose the EpocCam Camera from ‘Device’ after choosing ‘+’ - ‘Video Capture Device’

Make sure to have iTunes pre-installed, running and setup to recognize you’re iPhone or iPad. I left iTunes running, but minimized.

So far, easy to setup! I hope it continues to have support!!

EpocCamWebcam is not the problem but rather the software on your computer. I downloaded the software from the official site and thought nothing of it. I wasn't too happy with the connectivity issues so I went on to try and delete the software. It took me a good hour to get it off of my computer and when I had done a virus scan, it said it was a Trojan file. I should have scanned the files before I downloaded them but luckily I found videos online and got them off my computer as quickly as I could. For EpocCamWebcam , I'm sure it is fine but the software on the computer could potentially give you a very bad virus. My advice is to find another app.

My first go around was not great. I installed the window driver and EpocCamWebcam on my phone. When I started the epoccam viewer, I only had a white screen. Did some research but came up with nada. So I uninstalled everything. Later I decided to give it another try. But this time before I installed the window driver, I closed all other programs. This time things work as they should. However, the next day it was back to showing s white screen even though the driver said that my phone was connected. Uninstalled everything and reinstalled. Still doesn't work. Looks like it's a crap shoot.

Installed and uninstalled twice.
Connecting to Windows 10 (yes updated) using Kinoni’s drivers and own viewer/test app.
Installed and uninstalled drivers twice too.
No joy.
Third time worked for a single session.
Then not again.
Reboot, reinstall... Boo
Hmmm let’s try USB! Yup. Worked. Each and every time/launch. But I want WiFi.
Yes, I’m connected to the same network. Checked that.
But... let’s take even the router out of the equation. Configured static IPs. Want to do that anyway and not be connected to the internet while using it for certain situations.
Ooh... it’s working.
Great.
Closed app and viewer.
Had dinner.
Hey guys look at this...
Opened EpocCamWebcam and viewer back up.
Not working!

Oh come on guys!!!!
Can’t you get anything to be consistent?

I’d purchase the full product for sound/HD etc. if this actually worked. Doesn’t look like that’s gonna happen. Or I’ll get a response here either. Too bad. Looked promising.

I really should rate it one star. :(

I had some difficulty getting EpocCam to talk to my computer at first; my email to support was answered literally in minutes, during coronavirus lockdown when usage of online communications apps is at a sudden all-time high, with a lot of 1st time users who are likely to need support.

I hadn’t realized FaceTime doesn’t support 3rd party webcams. When I tried it w Skype it worked immediately, very easy.

I’ve been using EpocCamWebcam for about a day now and so far everything seems fine. Only complaint that I have is when running on OBS I get a lil text below my screen that’s advertising there stuff, which is sorta annoying because I am streaming and get asked what the text says. Other than that it is a pretty impressive app, I am considering paying for the 8 dollar one if the text doesn’t show up on my stream.

For OBS you do not need these apps. Please don’t buy.
Tried the free app. Kept dropping the WiFi connection. Said I needed to pay to use usb, which EpocCamWebcam description said was available with the free version. Paid to upgrade and I doesn’t work. In OBS I see the feed in can see the video of me moving but it is blocked by a spinning black fan and says “Waiting for connection” never goes away.
After 30 minutes of research online I realize... my phone was feeding screen shots to my computer without an app. I can just use the Apple camera app and USB connection. It’s already a webcam.

After much mental debate, I installed the driver on my Windows 10 workstation. It immediately started consuming 100% of my CPU resources. 6 cores, 12 threads. My machine became completely unusable. I couldn’t even open Windows settings to uninstall it because it was unresponsive. I had to reboot into Windows Safe Mode to be able to uninstall it.

I am kicking myself for being so trusting of a system level driver from an unknown company. Never again!

The only reason I don’t call it full-on malware is because it does appear to have uninstalled. I can’t find any further traces of it, but I sure am worried.

It took me a while to get this to work on my computer. It kept recognizing my phone when I opened EpocCamWebcam , but when I tried opening the viewer to see how it looked, the viewer wasn’t recognizing my phone, nor was Zoom. I found that the driver wasn’t digitally signed and had to change my computer setting in order to ignore unsigned digital drivers before it worked. This was on an older Windows 7 computer as well.