🏷️ About: FROM A SMARTPHONE TO THE CYCLING COMPUTER ON THE BIKE ■Connect with your bicycle ■Visualize your ride ■Show your route ■Record and review * To use all the functions, register with SHIMANO ID. * Cannot be connected to SC-E8000 This is a cycle computer app offered by SHIMANO.
- Easy to set up
- Does what it does well
- Shows how much battery is left
by T Van 1975
Doesn’t connect to E8000 on my Scott Genius. Over $5k for a bike and they can’t even get a simple app to work.
The E-tube app does work but even that is severely lacking compared to what Specialized has going on with their Mission Control for the Levo. Shimano needs to direct some of their limitless resources to giving these apps more functionality.
by Msmck1
I can connect to e-tube project, and my iPhone will successfully pair with the ew-wu111, but the e-tube ride app Will not connect. ETUBERIDE needs an overhaul.
by The Q4me
Why does ETUBERIDE not support an E8000 motor and display?
by Gifford :-)
For me, ETUBERIDE E-Tube-ride does not connect with my Shimano Step motors E8000 on a Scott e-Genius. The Shimano app E-tube works well as expected.
by Velocd
Simply would not connect to my EW-U111. I’m connected in Project E-Tube app, I can see the bike listed in E-Tube ride, but it just won’t connect no matter how many tries. Bad customer experience.
by ShredHead1
Wasn’t able to connect to E tube project easily but can connect to E tube ride. E tube project doesn’t register the bike signal at all. E tube project is extremely limited as far as adjustments for the motor goes. It would be nice to be able to really tune the motor ramp settings. Time for Shimano to up their game to compete for the next generation of mountain biking! Electric is changing the game. Also comparative to other electric assist, Shimano’s E 8000 kicks in and out of assist very harshly. Would be nice to smooth out the transition.
by Locksimths
Yeah I’m going through same problem connecting to E-Tube Ride.
After many attempts made a connection with the E-Tube project app, pretty ridiculous!
Clearly a Shimano’s software issue.
Let’s hope they here enough of this and get one of the millions of geeks out there that could fix this in a flash!
by Kbpaulson
The new update released today has a major IOS flaw. After opening ETUBERIDE , if you inadvertently touch and drag the screen even slightly, ETUBERIDE prematurely closes, not just minimized.
Any properly written IOS app should only close if dragged from the bottom of screen and upward to the screen top. This flaw also makes it impossible to open other apps on the iPhone without risking prematurely closing the Shimano app.
I enjoyed using the previous version of ETUBERIDE, but this new version is frustrating. Please fix ETUBERIDE asap to confirm with standard IOS swiping motions.
by RideorDi2
ETUBERIDE will not connect to my Di2 system at all. I was excited upgrading to Di2 partially for the wireless functionality that it provides but so far ALL Shimano software has been horrible. I like electronic shifting but their software is absurdly complicated and doesn’t work!
by Two Wheeler
ETUBERIDE will not recognize my WU-111 Bluetooth unit, despite the fact that it shows up just fine in the device list and works fine with the E-Tube Project app! Why does one Shimano app work and not the other -same wireless unit, same device?
by Exabrial
ETUBERIDE is *so close* to being a replacement for a bike computer. I really hope Shimano takes note:
1. One needs to be able to import a route via gpx, Garmin Connect, or Strava. Without this basic feature, ETUBERIDE is useless because you can’t plan a ride ahead of time or import a race route.
2. Favorite routes need to be able to be stored/recalled and re-imported/updated. What happens if ETUBERIDE crashes? You need to be able to quickly restart it.
3. Turn by turn directions are needed. Surprised to see these missing. Just a simple, ‘turn left in 400ft’ arrow indicator, maybe with a simple bell prompt. It doesn’t need to re-route, as many races won’t allow for that.
by Dontlikeadstoo
It displays a GPS map and my speed and keeps track of where I've gone and how fast I rode my bike. TopSpeed and all those good things but I have an 8000 and this does not actively communicate fully with the steps software and therefore I can't give it five stars because it lacks a lot of functionality at this point in time. For free, I'm not complaining.
by Kirk Reinholtz
Does what it does well, but i feel its missing a few valuable technical display options: a graph, while i ride, showing how many watts i am cranking over the last minute or so; and a similar graph showing motor total output and if it was limited by watts, or torque, or speed. And in ride log, same graphs over the whole ride. It would also be nice to get my total watt minutes for a logged ride, and watt minutes accumulated so far in the ride, and so on. And NUMBERS please, not unscaled graphs and 1..100%! For bonus points, show battery remaining change in watt hours, so i can estimate my situation based on what i know is ahead in the terrain.
by Roxanneolson
Just put out a simple one that shows how much battery is left. You can update with more features later. I don’t want to bring my phone on rides.
by 5767643356788
It was a little confusing to get it to connect, but once I did it was easy to set up, Btw I’m using a Di2 with dura ace 9000 on a bmc team machine SLR01
You have to click connect to wireless unit very small type
Yes. E-TUBE RIDE is very safe to use. This is based on our NLP (Natural language processing) analysis of over 512 User Reviews sourced from the Appstore and the appstore cumulative rating of 4.7/5 . Justuseapp Safety Score for E TUBE RIDE Is 57.1/100.
Yes. E-TUBE RIDE is a totally legit app. This conclusion was arrived at by running over 512 E-TUBE RIDE User Reviews through our NLP machine learning process to determine if users believe the app is legitimate or not. Based on this, Justuseapp Legitimacy Score for E TUBE RIDE Is 85.5/100..
E-TUBE RIDE works most of the time. If it is not working for you, we recommend you excersise some patience and retry later or Contact Support.
* Some functions are only available to logged in users who live in Australia, Canada, European Economic Area (EEA) countries, Japan, New Zealand, Switzerland, Taiwan, and USA.
Use Bluetooth® LE to connect your phone to your SHIMANO STEPS E-BIKE, Di2 drivetrain, SHIMANO power meter*1, and other sensors*2 .
* To use all the functions, register with SHIMANO ID.
Check the speed, assist mode, and Di2 gear position.
Search for the route to your destination and display it on a map.
