Contact Total Connect 2 0 Support

From 2021: still terrible. The same problems with functionality persist two years after my first review. Now even worse. The programmed events do not work. I have programmed a Monday through Friday open/close schedule. Every Wednesday at 1pm the system moves the temperature to the “off” hours temperature so into he winter we get cold and the summer we are burning up and have to go manually adjust the thermostats. Most days the program does. It turn on in the mornings. In the summer not a big deal, the AC catches up fast, but in the winter, my business is cold for two hours if I do not remember to raise the heat from the app while I’m still at home. My contractor that installed the product has been unable to figure out the problem. Totally unacceptable. I am building a second office and have instructed the contractor that we will not be using this product! From 2018: I have used this app for over a year and a half for my business. When controlling the HVAC it won’t accept a change in temp or fan setting on the first try. It has always required a second change before actually updating. The scheduling options are limited and time consuming to edit. The “circ” setting on the compatible wall mount control panel is not available in the programming options. I thought there would be an update to address this but still having the same issues I’ve had since day 1.

I have had the alarm system for abt 3 yrs now. The alarm part works fine. The camera they could never get to work.. could not connect to my Wifi for some reason. The first attempt to get a camera was abt a year ago, I believe.. they took the camera back down and took it with them.. due to not being able to connect camera to my WiFi. Mind u, my WiFi works perfectly fine with every other wireless product I have had.. so I thought I’d give it another try and called them back out to try to install another camera before I was to leave for out of state for 10 days.. I’m goin to cut to the chase.. once again they couldn’t connect to WiFi and blamed it on att.. so att gave me new router and said everything looked good and in working order. Tried to get a tech back before leaving for vaca and after 2 hrs on phone and climbing up and down ladder trying things the guy on the phone was having me try, I asked to speak with a supervisor.. They could not get tech there before I was to depart so I argued to let me out of contract so I could go elsewhere and they refused..and needless to say, myhouse was robbed and glass sliding door busted out while I was gone. Would have been nice to have a camera working.. I’m still contemplating taking my police report and suing them for the price to replace door ( which I obviously had to do immediately upon arriving home) and my stolen property.. I definitely would NOT recommend amp or total connect.

Every new version of this app is better than the next one. In other words, it just keeps getting worse. Sensor bypassing used to be simple, intuitive, and right on the home screen on iPad. Now you have to go to a separate screen and even after bypassing sensors it is hard to tell if they are actually bypassed. How hard is that to get right? I would recommend working on connectivity issues which have plagued this app from the start rather than “tweaking” the UI which these current developers clearly understand little about. This app should be simple and intuitive to use and with rock solid connectivity. Currently it has neither. I paid hundreds of dollars for the hardware and am wondering if I will have to do that again with a different vendor just to get a decent iPhone / iPad app to control it? Come on Honeywell, hire some decent software developers! Update - this app has become unusable and rarely is able to connect to the panel anymore... Zone Data Error... Cannot Connect To Panel At This Time... This Junk DOES NOT WORK AT ALL ANYMORE!!! PERIOD!!! How hard is this to do Honeywell??? Hire some competent developers and fire the clowns that ruined this rather simple to do app. I am going to have to switch vendors for my security system ... I am paying for this!!!