🏷️ About: Control your Air Lift WirelessOne on-board air compressor system with the WirelessOne App. Works with 2nd generation WirelessOne systems (P/N 25980, P/N 25980EZ, and P/N 25981EZ).
We Investigate the app owner's website (Airliftcompany.com), verify their legitimacy, and uncover hidden scams and complaints.
Not sure if it was an upgrade or what, but can no longer get app to connect. It worked fine before, way to ruin it.
Got a new phone and cannot connect phone to manifold. Keeps saying to put it in pairing mode and when it already is.
About one week ago, I installed update 2.1.0 and now my airlift system won’t connect with AirLiftWirelessOne . The remote still works.
AirLiftWirelessOne sees the manifold, but won’t connect to it, no matter how many times I pull the fuse to reset manifold. Before the update, it worked just fine. I also tried it with my iPad, and my wife’s phone and iPad with the same software installed, and they don’t connect either.
I have iOS 16.5 installed. The handheld remote works and it’s also Bluetooth, so most likely the iOS app is buggy.
I don’t recommend installing version 2.1.0. Of course, we no longer have access to the previous version.
AirLiftWirelessOne is useless. It won’t connect no matter how many time I attempt to put it into pairing mode. Pull the fuse, wait 5 seconds 10 seconds 30 seconds… it doesn’t matter, it refuses to pair. Maybe it’s a software compatibility issue between iOS, I’m not sure. But honestly who cares… it’s useless if it doesn’t connect. It’s not my job as a consumer to figure that out.
Won’t connect
As others have stated. AirLiftWirelessOne won’t connect. Developers, please fix the bug!
App worked goo up until a few months back. Will not connect to phone. Bluetooth connects them disconnects. Keeps going back and for and it never works anymore. App is useless.
App is junk. One would think if you buy a product AirLiftWirelessOne would function properly. It will not connect no matter what I do, complete and total waste of time. Zero starts.
AirLiftWirelessOne doesn’t work - even following the video made by Airlift themselves it won’t even detect the system. An utter waste of time.
Had Air Lift 7500 XL installed on my truck last week. Airbags are wonderful, but AirLiftWirelessOne is a piece of crap. Have never been able to get app to pair with compressor, deeming it 100% USELESS. I’d give it negative stars due to the aggravation and wasted time of I could!!!
No longer stays connected since last iPhone update. Did work great but now intermittently connects and disconnects. Seems to be a Bluetooth issue.
The pink wire has power when the ignition is on or running. The compressor has power and runs on startup or if I let air out. Reset everything…. Phone, fuse, etc. No connection. Useless.
AirLiftWirelessOne shows the model number. Instead of showing actual current pressure on AirLiftWirelessOne . It only show when the pressure when inflating and deflating. Can you make changes to AirLiftWirelessOne to show the current pressure. Otherwise, AirLiftWirelessOne works great.
Better than the remote that came with the unit.
App works well however it needs 2 key things that would. Are it so much better. More than 3 saved psi settings. Make a CarPlay app
When trying to connect to AirLiftWirelessOne you need to pull the fuse then reinstall that will put the unit into search mode then it will connect to AirLiftWirelessOne . Once connected you shouldn’t have any more issues connecting each time. But the very first time you try you need to make sure the unit is in pair mode by pulling the fuse first.
The only improvement I would like to see is making AirLiftWirelessOne Apple CarPlay friendly. Then I would give it a 5 to have complete control on my dash.
I see a lot of people posting negative reviews about pairing. I too had a problem until I realized I was pulling the wrong fuse when trying to pair. Do not pull the fuse that is tied into your fuse box. You have to pull the main power in-line fuse. Once tou do, it will pair properly.
The only thing keeping me from giving it 5 stars is the lack of a widget for iOS. Get with the program app developers.
AirLiftWirelessOne works like it is supposed to. You need to open AirLiftWirelessOne , then go to devices. Click on the compressor. Before hitting enable, you must first pull the fuse out and reinstall it. This gives you a 3 minute window to then hit enable and pair with the compressor. AirLiftWirelessOne is a bit vague on what power cycling is. Hope this helps some of you.
Connects just fine but depending on how you’ve wired the system you will either need to pull the fuse or connect AirLiftWirelessOne as soon as you hook up the power.
App is easy to use and useful. I’m docking 1 Star since the power cycling procedure could be better described for the less mechanically inclined among us.
Called Air Lift because phone would not sync with wireless manifold. Was on hold for 45 minutes. They told me that it does not work with the iPhone X. You would think they would put this on there website.
Developers contacted me and said that I was misinformed and ask me to call them back. Once I spoke with someone that knew what they were talking about they helped me get it operational. You need the Air Lift WirelessAir app if using and iPad or iPhone.
Air Lift WirelessOne does not appear safe based on available data.
JustUseApp Safety Score for Air Lift WirelessOne is 5.3/100.
This assessment is based on our NLP analysis of 41 user reviews.
Combined with the app store average rating of 2.6/5.
Air Lift WirelessOne does not appear legitimate based on our analysis.
Our NLP models processed user feedback to estimate legitimacy. JustUseApp Legitimacy Score for Air Lift WirelessOne is 5.3/100 .
This conclusion is based on analysis of 41 user reviews.
Air Lift WirelessOne collected the following data from you:
Works with 2nd generation WirelessOne systems (P/N 25980, P/N 25980EZ, and P/N 25981EZ).
Control your Air Lift WirelessOne on-board air compressor system with the WirelessOne App.
