🏷️ Über: Introducing Pikaslice, a comprehensive slicing solution for both Resin/MSLA and Filament/FFF 3D printers on the mobile platform. Effortlessly import your 3D models, adjust their orientation and layout, apply manual or automatic supports, examine your scene for islands, and export your work to an extensive range of supported Resin/MSLA and Filament/FFF 3D printers.
No support for Magic Keyboard, trackpad not supported and some UI buttons on top are so small that even not clickable with apple pen or by hand. -> UI is not usable
I payed the 5€ for it and it just does not work. All my prints on my Photon M3max fail. I couldn’t get a single print with this slicer. The best I got was: the printer printed all the supports, and that was it. No model and nothing. Also: in the app, the supports often don’t work right on big surfaces. You have to manually adjust. Or use a trick: flip the object upside down and then it usually adds the supports without a problem. It just doesn’t print the object. No idea where the mistake is, if it prints the supports perfectly it should be able to print the model too.
Only Q1pro is supported, the entire series3 (x-smart3, x-plus3, x-max3) and the new shiny series4 (Plus4) are missing. Useless for me, deleted the app.
i like this slicer a lot. the customizable ui scale is a great feature and most settings are very intuitively reached.
regarding usability, i think rotation is the most flawed. i feel like the rotation midpoint is not in sync with the touched coordinates or the selected model.
two stars deducted for subscription requirement.
Ich finde Pikaslice super.
Wie ich hier mit dem Tracpad des Magic Keyboard arbeiten kann habe ich aber noch nicht herausgefunden.
Nice and intuitive program, but is there a way to insert a skirt or raft in FFF mode?
Hi there,
I would highly appreciate a preset for Anycubic Kobra Plus.
Unfortunately there is only one available for the Kobra 2 Plus.
Many thanks in advance.
Sebastian
I have a Anycubic Chiron as well as a Elegoo Mars…
Hatte vorhin nur einen Stern gegeben, weil das Programm nicht funktionierte. Muss ich revidieren, ich hatte die falsche Versionseinstellung. Programm ist mega. Sowas brauchen wir noch für FDM Drucker.
App funktioniert einwandfrei auch auf dem IPhone lässt sich damit gut arbeiten. Auch mein resin Drucker wird unterstützt.
Super hilfreich und besser umgesetzt als die meisten herkömmlichen slicer
Pikaslice wirkt anhand der vorliegenden Daten nicht sicher.
JustUseApp Sicherheits-Score für Pikaslice: 0.1/100.
Diese Einschätzung basiert auf unserer NLP-Analyse von 24 Nutzererfahrungen.
Zusätzlich zur durchschnittlichen Store-Bewertung von 3.0/5.
Pikaslice wirkt nach unserer Analyse nicht seriös.
Unsere NLP-Modelle schätzen die Seriosität. JustUseApp Seriositäts-Score für Pikaslice: 0.1/100.
Dieses Fazit beruht auf der Analyse von 24 Nutzererfahrungen.
**Die Preisdaten basieren auf durchschnittlichen Abonnementpreisen, die von Justuseapp.com-Benutzern gemeldet wurden..
| Preis pläne | Betrag (USD) |
|---|---|
| All Access Bundle | $4.49 |
| All Access Resin | $3.99 |
| All Access Filament | $3.99 |
| All Access Bundle | $39.99 |
| All Access Resin | $35.99 |
| All Access Filament | $35.99 |
Effortlessly import your 3D models, adjust their orientation and layout, apply manual or automatic supports, examine your scene for islands, and export your work to an extensive range of supported Resin/MSLA and Filament/FFF 3D printers.
To transfer the exported files to a thumb drive (and subsequently to your printer), you'll need an adapter, such as USB-C to USB-A, depending on your specific iPad and thumb drive model.
Introducing Pikaslice, a comprehensive slicing solution for both Resin/MSLA and Filament/FFF 3D printers on the mobile platform.
Please note that this app is compatible with a variety of resin MSLA, DLP, and FFF/Filament 3D printers (see the list within the app).
While the use of an Apple Pencil is highly recommended, it is not mandatory.
