Belt Control ne fonctionne plus

To change the front direction, activate the button "Change front direction" and adjust the orientation of the highlighted compass rose by moving your finger on the screen until the vibration is at the belly button.  For example, if the direction arrow on the screen points upwards to number 1, the vibration is permanently located at the front of the belly, no matter how the belt wearer turns.  Then activate the "Change front direction" button and swipe your finger over the image to change the orientation of the marked circle.  To adjust the front direction, first set the direction arrow pointing upwards on the vibration element 1.  If the vibration is not already felt in the middle of the belly, you have to adjust the front direction in the app.  This is recommended if the naviBelt is worn around the waist in a different position than recommended, because in this case there is a different vibration element at the front of the belly than the usual one.  In position mode, you can also change the front direction.  This allows you to adjust the signaling through the belt so that the belt vibrates to this front direction instead of north.  The belt wearer first aligns himself so that the desired new front direction is directly in front of him.  To confirm the selection of the current front direction, deactivate "Change front direction".  You can specify which side of a room or parcours you want to refer to as the "front direction".  Compass Mode: In the "Compass" mode, you can define in which direction the naviBelt should vibrate.  Position mode: In the "Position" mode, each of the 16 vibration units of the feelSpace naviBelt can be selectively activated.  Parcours mode: In this mode, you can change the reference system for the directional display by the naviBelt.  If the compass needle on the screen points to the east, the vibration of the belt now also points to the east instead of north.  To do this, first move the direction arrow on your screen upwards.